Fliegl 3-Achs Jumbo Auflieger Plateau offen laituri puoliperävaunu

Description: Open semitrailer
Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
Please note: The images are archive photos! The vehicle may still be in use!
Permissible/technical gross weight: 35,000 / 39,000 kg
Permissible/technical payload approx: 28,880 / 32,880 kg
Permissible/technical aggregate load: 24,000 / 27,000 kg
Permissible/technical fifth wheel load: 11,000 / 12,000 kg
Unladen weight (basic version) approx: 6,120 kg +/- manufacturing tolerance
Overall length approx: 13,800 mm
Maximum overall width: 2,550 mm
Overall height approx: 2,388 mm
Gooseneck length approx: 4,050 mm
Low bed length approx: 9,600 mm
Loaded loading height in the low bed approx: 900 mm
Internal width approx: 2,480 mm
Coupling height approx: 950 mm
King pin installation dimension approx: 1,680 mm
Front corner dimension approx: 2,040 mm
Note: The trailer may only be towed by tractors with functional ABS!
Frame: Hot-dip galvanized including passivation
Front corner stakes: Hot-dip galvanized
Front wall: Aluminum
axle configuration: 3 axles
colour: silver
Weights and Dimensions
Chassis Semi-Trailer Forwarder
Fine-grained steel welded construction
fifth wheel plate with replaceable 2" king pin
Telescoping front low bed extendable by approx. 1,500 mm
lockable every 500 mm
Bocyey Slhqspt S Ndedg
Slightly inclined outer frame
new design with 'Load-Lock profile' for attaching lashing straps
'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame
24 t
2-speed landing gear
single-sided operation
with straight lower part
without compensating support
Free landing gear corner dimension and rear swing clearance approx. 1,920 mm
Aluminum side underrun protection
Steel rear underrun protection
Quarter-shell mudguards
9 pairs of lashing/rack rails transverse in the floor
embedded up to the main frame
approx. 100 mm high. With 20 mm round steel rails
top and bottom
distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate
half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck
6 pairs in the low bed section)
3 pairs of stake pockets recessed in the outer frame
approx. 72 x 42 mm internal dimension
Axles & Suspension
Drum brake axles according to manufacturer specification
'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption
Brake System
2-line compressed air braking system
Color-coded lines for easy service
Spring-loaded parking brake
2 error-proof coupling heads at front
without connecting line
Electronic Braking System with EBS socket at front
without connection cable
With raise & lower valve
Vehicle driving stability system
Wheels and Tires
235/75 R17.5
manufacturer at discretion
Steel rims
factory silver
Electrical System
24V
multi-chamber lights
side-mounted yellow LED lighting (recessed)
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin error-proof sockets at front
without connecting cable
1 additional LED work light at rear
operated via reverse light
Floor
Anti-slip phenolic plywood panels
approx. 30 mm thick
high point load capacity
suitable for forklift axle loads up to max. 5,600 kg
Front wall / Corner stakes front
25 mm aluminum hollow profile
1,350 mm high
Country of registration / license plates
Germany
Inspection and certification in Bosnia
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective tape according to ECE R 048
white on sides
red at rear
Warning sign according to ECE - 70
Paintwork
'15-year warranty against rust-through'