Uudet Serin Box Semitrailer umpikori puoliperävaunu

TECHINCAL SPECIFICATIONS OF PLYWOOD BOX SEMI-TRAILER

Truck Tractor Type : 4x2 Truck Tractor with fifth wheel height 1100 mm
Chassis: ST 52 Material “I” profile it is produced with gas welding, it has high quality strength, Standard Chassis Type, produced according to the 98/91 EEC standards
Inner Lenght Dimension
—Length 13.600 mm mm x Width 2600 mm x Height 2900 mm
Over All Lenght Dimension
—Length 13440 mm mm x Width 2480 mm x Height 2700 mm
Platform: Phenolic waterproof plywood plate (30 mm)
King Pin: 2” king pin according to the 94/20 EEC
Pin detachable from below made by SAE standards 8 bolt type JOST Brand.
Axles: 3 x 09.000 kg carrying capacity SAF brand Disc Brake Type
Distance Between Axles: 1320 mm
Brakes & Suspension: Air Suspension , EBS Brake System KNORR brand, automatic load adjusting valve 71/320 EEC and 2002/78 EC standards, Automatic Slack Adjuster
Landing gear: Double Speed, 24000 kg carrying capacity SAF brand, Mechanical Landing Gears
Rear Bumper: Suitable 70/221 / AT-version of the rear bumper
Tire Chock: Carriers with 1 unit wheel chock
Tires and Rimes: 6 PCS 385 65 R 22,5 Single tire type
Mud Cover: 6 Units full plastic mudguards fited with galvanized steel holders.
Spear Wheel Carrier: 1 piece tire carrier Basket type
Tool Box: 1 pcs Plastic Tool Box 80 x 50 x 50 cm
Paint: Steel Material surface are cleaned by grit metal and send, which is shot blasted on the surfaces of the metal, 2 Floor Epoxy primers are made and final paint with standard RAL 7024 or demand of the customer, total thickness of the paint 150
Electrical System and Lightening System
—3 unit’s amber-colored lights placed on the both sides
—Park lamps at the rear side of the vehicle (with a protective grill)
—License plate lamps,
—Reflector triangles,
—Flame proof electrical system
—2 X 7-pin and 1 x 15-pin electrical socket.
Equipment : Tool box keys, Ro-Ro Lashing Rings, Fire Extinguisher Box, Rear Ladder, Forklift barriers, Rear Bumper,
Optional Accessories, According to the demand optional accsesories will be added in the proposal
Side Protectors: Side preventive protectors made from high strength material complied with 70/156 EEC standards

BOX STRUCTURE
Panels Dimensions
—Front Wall 20 mm fiberglass reinforced plywood panels
—Floor 30 mm waterproof plywood plate
—Rear Door 30 mm insulated sandwich panel sandwich panel made from fiberglass and foam
—Roof 10 mm polyester fiberglass translucent roof arched crossbeam reinforced 250 mm
—Side Panels 20 mm fiberglass reinforced plywood panels
Panel Structure
—Plywood Panels covered with polyester film with thickness of 30 mm
—Sandwich panels made from polyester sheet and foam
Inner Lighting
— 2 PCS Amber colored lights
Rear Door
—Two side rear doors with recessed locks, Sandwich panels made from polyester sheet and foam