Fliegl SDS 390 Gardine Standard Ultralight Coil liukukapelli puoliperävaunu

Description: Curtainsider Semi-Trailer with Coil Well
Functionality: fully functional
Note: bodyside boards must be opened to hook straps in when used together with bodyside boards
axle configuration: 3 axles
colour: silver
Archive photographs
the vehicle may still be in use
#Chassis - Semi-Trailer
General Haulage
Fine-grain steel welded construction in lightweight design
Dobyswhp A Dek U Slnecp
Fifth wheel plate with replaceable 2" kingpin
Coil well approx. 8,040 mm long
6 coil supports (coil pockets
internal 82 x 52 mm)
Coil well cover with plywood panels and steel sub-beams
2 split-strip coil well covers
each approx. 293 mm wide
weight approx. 13 kg per cover
Outer frame slightly angled with "Load-Lock-Profil" for lashing strap attachment
9 pairs of lashing rings
5 t each
recessed in the coil well area
24 t two-speed landing gear
one-side operation
straight leg
without slide compensation
Note: clear corner dimension/rear swing radius of landing legs approx. 1,930 mm
legs retracted
Pull-out ladder at rear
Side door retainer
Aluminium side underrun protection
bracket fitted transverse to and on the chassis rail for supporting aluminium slats
Aluminium front underrun protection
Half-shell mudguards with anti-spray flaps to EC standard
Rear corner impact protection
1 plastic toolbox
2 pairs of stake pockets recessed in the outer frame
approx. 72 x 42 mm internal size
2 stake pockets recessed centrally in the floor
approx. 72 x 42 mm internal size
#Axles & Suspension
SAF disc brake axles with 430 mm disc diameter
Laser-aligned axles/running gear to reduce tyre wear and fuel consumption
Staggered axle spacing 1,410/1,310 mm (combined transport) up to 44 t gross train weight
#Braking System
2-line air braking system
colour-coded pipework for easy servicing
Spring-actuated parking brake
2 anti-mismatch coupling heads at the front
without connecting line
EBS made by Haldex
Electronic braking system with EBS socket at the front
without connecting cable
#Wheels & Tyres
385/65 R22.5"
Polished aluminium wheels
Wheel bolt protective caps
#Electrics
24 volt
Multi-chamber lights
Yellow LED side marker lights
Premium LED package including side marker lights with 20 LED diodes per light + LED safelight
at top of rear corner posts
2 white LED front position lights
2 white/red outline marker lights at rear
1x 15-pin socket at front
#Floor
Plywood panels approx. 30 mm thick
for high point-load capacity
forklift axle load up to max. 5,600 kg
#Front Wall / Front Corner Posts
Steel corner posts
reinforced design
Release mechanism for side curtain at front wall
"Crash-Blocker"
Steel impact protection on lower inner section
approx. 140 mm high
#Centre Posts
3 pairs of sliding posts
movable along the entire length
with 4-way insert pockets and long pocket at the bottom
3 pairs of post positions
#Rear Wall / Rear Corner Posts
Steel rear corner posts up to roof edge
Curtain attachment with round tube and curtain tensioning ratchet
Rear portal doors
2-leaf
each with 2 internal rod locks
Fliegl "I-Lock" integrated door lock
#Curtain
Curtain with welded-in horizontal and vertical straps
Tensioning buckles in stainless steel
#Roof
rear end-lift foldable
Roof sliding from rear to front
L-section roof rail for automotive industry use
Internal width between roof rails approx. 2,490 mm
"Roof non-elastic"
minimal roof rail deflection during loading and unloading